Newbie Step-by-step Guide to Installing a New Shower Unit

Newbie Step-by-step Guide to Installing a New Shower Unit

Blog Article

Call Today

The author is making a few good points regarding How to Install a Freestand in general in this great article below.

A successful shower installation calls for cautious preparation as well as a lot of job. For the most part, you will require to do three sorts of tasks: mounting wall surfaces, installing the plumbing, as well as ending up walls.

Prep work

Firstly, you need to decide on the type of shower that you want to set up. It is important to establish whether the picked shower is capable of dealing with specific systems and also can manage a safe level of water through the central heating boiler. Most shower units nowadays are developed to be versatile to various water stress (such as kept hot water as well as chilly mains).
It is also important to take into account the water pressure and the preparation of the piping and also drain for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose and spray parts of the push-on mixer shower system can be attached to the bathroom faucet according to your need, and also the water temperature level can be readjusted through the taps. Push-on mixers are cheap and also very straightforward to mount. However, although the hose link is easy, it is conveniently removed. Additionally, it is bothersome to change the temperature level.

Bath/Shower Mixer: The hose pipe and also spray of this type of shower are integrated with a bathroom mixer faucet, and the temperature can be adjusted with the bathroom faucets. It is a really affordable alternative and no extra plumbing is entailed. Nonetheless, the bath/shower mixers additionally suffer from inconvenient temperature control options.

Manual Mixer: The hose pipe as well as spray of a hands-on mixer shower system are a part of the wall unit and the hot and cold water products are attached to a solitary valve The temperature and also stress of the water are regulated with either one or a range of knobs (in much more expensive showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more expensive than the formerly pointed out mixers. They also call for added plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The pipe as well as spray of this shower type belong of the wall system and the cold and hot water supplies are linked to a solitary shutoff here as well. It is full with a built-in stabiliser to self-adjust the water temperature and also to stop it from becoming as well hot. One of the largest advantages of a thermostatic mixer shower type includes practical temperature level control. Nonetheless, it is one of the most pricey of the different mixer options.

Power Shower: A power shower is a single unit including a powerful electric pump that is capable of modifying both the water stress and also temperature level. This kind of shower can be fitted if there is water system from a cold water cistern as well as a hot water cylinder. A power shower makes the modification of both pressure and temperature simple. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is essential to keep in mind that for this shower kind to be installed, the keys stress needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature level as well as pressure to be readjusted through a handle. Designs with temperature level stabilisers are better as they continue to be untouched by various other faucets somewhere else in operation within the household. A major disadvantage of electric showers is that the control handle just allows for the option of heats at less pressure, or lower temperature levels at a greater pressure. This is troublesome in the winter when the spray is frequently weak as well as the mains water is colder. However, this problem is taken on in some designs which are available with a winter/summer setting.

Approach

Relying on the kind of shower you wish to mount, the shower head have to either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it should have a check valve.
Prior to starting, it is advisable to note the placements of the shower head and control, and also to plan the pipe-work included. Furthermore, the drainage system to remove the waste water will require to be prepared. Both positions of the wire path and the shower button will additionally need to be considered if a rapid or electric shower system is being mounted.
Use the direction overview offered with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is very important to remove the water supply. In order to safeguard the pipelines, they ought to be provided a water resistant covering as well as likewise fitted with separating valves. The pipes can after that be hidden into the wall and plastered over to neaten the total appearance.
Fit the base tray, shower head, as well as fittings.
Link the main shower control to the pipelines that will be supplying the water (This might need a female screw thread adapter).
Reconnect the water supply and test the pipes for any leakages, as some may need tightening up.
If you are mounting an electrical shower, keep in mind to turn off the electricity supply before making any type of electric links. As soon as these links have actually been made (there need to be assistance within the instruction manual), the power supply can be changed back on.

Changing Water Pressure to Fit Your Shower

The cold water tank can be lifted to a higher height (in some cases as little as 150mm (6inches)) by fitting a strong wooden assistance under it - potentially composed of struts and blockboards. If you choose this alternative, the primary and also distribution pipes will certainly also need to be elevated to meet the new elevation of the storage tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be linked right into the power supply in order to run.

Piping and Drainage

It is best to use 15mm diameter supply pipes, as well as make the runs to the shower as short as well as straight as feasible so regarding preserve optimal stress and also reduce warmth loss. In addition, by reducing making use of joints for pipeline edges, you can reduce the resistance in the flow of the water. You can achieve this by bending the pipes instead.

The Majority Of Common Mistakes

Breaching or overlooking local code limitations.

Utilizing pipelines that are also little.

Attaching copper to galvanized without utilizing a brass or dielectric fitting between both.

Not using tape or pipeline compound at threaded joints.

Uneven your components when mounting them.

Not installing an air space filling up for fixtures.

Cutting supply stub outs too brief to mount the shutoff valves onto after the ended up wall surface is in area.

Not effectively lining up tubing into fittings or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will certainly cause a leakage.).

When turning the water back on in your house, always run the outside pipe shutoff or purge your bathrooms to hemorrhage dirt and also air from the lines. This particles can create problems in your sink taps and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I am just very interested in How to Install a Direct-to-Stud Shower Enclosure and I really hope you enjoyed reading our blog entry. Sharing is caring. You never know, you could be helping someone out. We treasure reading our article about How to Install a One-Piece Shower Unit.

Book Your Service

Report this page